Saat Technologe

Phone in Turkey

+90 539 893 40 01

Phone in Romania

+40 744 578 303

CONVEYOR BOTTOM SILO

The Saat Technologe rectangle silo is suitable for the storage of grain, corn, oilseeds, and rape. The silo with a conveyor floor, however, is not suitable for pelleted and floury goods. Optionally, a version for seeds is available.

Saat Technologe rectangle silos can be optimally fitted to each building. The individual cells can be up to 10m long, 4m wide, and up to 10m high. Single existing supports within the building can be integrated into the silos.

In the version with the conveyor or ventilation floor, the silo can be used as a cold air dryer. In the Saat Technologe ventilation silo, grain can be stored with up to 20% moisture content and can be dried by full ventilation combined with “move”. The mounted conveyor and ventilation floor can be used for either ventilation or emptying the grain.

Choose Saat Technologe grain storage, for your precious crop is threatened by the following factors:

  • spoilage by molds
  • damage by beetles
  • can be eaten by rats and mice
  • may be contaminated by cats

The rectangle silos by Saat Technologe are available in three versions:

  • grounded mounting
  • mounted on a hopper (screwed or welded) or
  • conveyor floor installation

Advantages of Saat Technologe rectangle silos

  • the weather risk is reduced because the grain can be stored moist
  • large quantities can be taken over and are immediately under control
  • the takeover effectiveness of large quantities guarantees also a busy harvester-use
  • reduction of worktops – thus lower costs
  • conservation of the crop for longer periods at low cost and time taken
  • high sales proceeds during seasonal fluctuations
  • exact design – therefore easy and fast assembly
  • all elements are galvanized – modular system
  • favorable “price-benefit ratio”.

 

A lot of reasons to argue for conveyor-bottom:

Pollution:
The union of ventilation and grain removal saves conveyors above all at several cells.

Conveyor’s bottom:
The removal by conveyor-bottom is wear-free and handles the grain with care.

Plate between bottom and grain:
Through the complete separation of ground and grain, no ground moisture can reach the storage grain.

Excellent ventilation:
The ventilation is excellent through the big air exit surface. Cooling of the grain through winter ventilation on 10°C is possible and protects from insects.

Storage of grain up to 17% humidity:
Because of the good ventilation of the grain, the grain can be stored up to a maximum of 17% humidity. With a ventilation of  50 – 100m³ air capacity / h. /m³ you can conserve the grain and prepare storable.

Cold air drying:
With an air performance of the fan from approximately 100-200m³ per hour per m³ grain, cold-air drying is possible up to a maximum of 20% grain humidity. The maximum filling height is 4-5m. You have to attend to work with as low air humidity as possible. With a heater, the air can be heated (max. heating 4°-5°C!). Air heating via a heater reduces the relative air humidity per °C about 5%. For “cold -air-drying” a relative air humidity of approx. 65-70% is enough.

Saving space:
Through the rectangular and quadratic silos, you take advantage of your expensive building optimally. Finally, you don´t build your hall in round nature.

Saving material:
Often you can save a lot of material by a clever installation of silo cells because the first cells build parts of further cells.

You don´t waste money because of higher investment costs, but over time it saves a lot of costs for drying and it is very effective against insects and is environment-friendly. Using a conveyor-bottom saves a lot of time by total emptying and is a great assistance

Do you need more information?

You are always welcome to call, e-mail, or chat on WhatsApp
with our Sales Engineer Team to answer all your questions you
have in mind. We will do our utmost to revert as soon as
possible.

Saat Technologe exports to 70 countries on 4 continents. Consult any project you have in mind to benefit from our field experience. From Start-up, Turn Key Projects, to existing plant modifications; We are with you all the way.

 

FAQ

Saat Technologe provides 24 Months of warranty for all its Conveyor Bottom Silo, please ask your Sales Engineer for the manufacturer’s Warranty Conditions.

Saat Technologe ‘s After Sales Support Team is ready for immediate support with Phone calls, online chat, and or video calls for all your technical needs for your Conveyor Bottom Silo, You can ask for your user manual or look into your stand-by spare parts list provided by Saat Technologe.

All your questions about Conveyor Bottom Silo, like Capacity variations on which conditions, best conditions, application areas, Optional features, adjustment parameters, Before and after results, yield, work principle in greater detail, assembly variations, auxiliary equipment, Electrical parameters, Why to buy from Saat Technologe, What sets Saat Technologe apart from others, references, how many of these machines have been built and working, life Span and effecting matters, Spare parts and wear and tear parts, preventative maintenance, how to handle waste, how to handle dust if any, how to adapt to your Seed business whether be Farmer, Wholesaler, importer, exporter or Retailer, the value for Money, what are included what is excluded, transport cost, installation, and training, after-sales support, warranty conditions and any other topic you may relate to your business need, always happy to assist.

Phone in Turkey

+90 0539 893 40 01

Phone in Romania

+40 744 578 303